Florian Müllner [Wed, 11 Jun 2014 11:13:12 +0000 (13:13 +0200)]
appDisplay: Use GrabHelper for folder popups
As clicks outside the app picker should still be handled normally
while clicks inside should dismiss the popup, we cannot make full
use of GrabHelper. However using it at least for focus handling
fixes some minor details we are getting wrong, for instance not
restoring the previous focus after dismissing a folder popup.
Florian Müllner [Thu, 5 Jun 2014 16:09:47 +0000 (18:09 +0200)]
main: Move pref overrides back into C
Commit 6c2f3d1d178a65d moved pref overrides into JS to implement
session mode specific overrides in a clean and generic way.
However that approach comes with a cost - doing the overrides only
after having handled over control to JS means that the core will
be initialized with the non-overridden settings before changing
to the correct values. In the best case this is unnecessary work,
but it can in fact have a worse effect: when initializing workspaces,
we will restore the previous number of workspaces when using
dynamic-workspaces and reset to the configured number otherwise.
As the non-overridden default for dynamic-workspaces is FALSE, we
can easily end up moving the user's windows to the "wrong" workspace.
Now GSettings is expected to grow support for session specific defaults,
which will render our entire override system obsolete (yay!). Given
that, it seems acceptable to use a less generic (and uglier) approach
in the meanwhile, in order to fix aforementioned problems. So move
overrides back before core initialization and just hardcode the
session-mode => override-schema relation.
Florian Müllner [Sat, 31 May 2014 03:19:20 +0000 (05:19 +0200)]
windowMenu: Do a better job with faking the source actor
The 0x0 dummyCursor works well when the menu pops up directly underneath
the pointer (e.g. when triggered by right-clicking the titlebar) or by
keyboard, but not when triggered by the menu button - the menu does not
point to the center of the button's bottom edge, and unless the user
keeps holding the mouse button while moving into the menu, the menu will
be dismissed immediately on button release.
Address these issues by using the button geometry to overlay the window
button with an appropriately sized actor that acts as a proper sourceActor,
to make the window menu behavior consistent with other shell menus.
Florian Müllner [Mon, 2 Jun 2014 19:47:24 +0000 (21:47 +0200)]
windowMenu: Implement new show_menu_for_rect() hook
Having the full geometry of the menu's source button (if any) will
allow us to address several misbehaviors of window menus, so use
that instead of show_menu().
messageTray: Clear the pointer left timeout when showing a notification
When the pointer leaves the notification area, we queue a timeout to
hide the notification after a little while. If the user is hovering over
a notification and clicks the X button to close the notification, we will
destroy the notification, which causes a "pointer left" event on the
notification area. This queues a timeout which erroneously fires after
the next notification in the queue shows up.
The code and state machine are too complex to properly make sure this
timeout doesn't fire when there is no notification up next, so instead
just clear it when showing a notification to make sure that any
previously queued timeout doesn't apply to us.
Antoine Jacoutot [Fri, 30 May 2014 09:26:39 +0000 (11:26 +0200)]
openbsd: fix shell_global_reexec_self()
Rework the way we re-exec the shell on OpenBSD so that it does not only
work the first time it is re-exec'd.
Plug a small leak in the __linux__ case while here.
We don't make use of any functionality StTable provides over
ClutterTableLayout, so port all users to the Clutter layout
in order to remove our own copy of the code.
We don't make use of any functionality StTable provides over
ClutterTableLayout, so port all users to the Clutter layout
in order to remove our own copy of the code.
telepathyClient: Only use 12-hour format when supported by the locale
It is a bit odd to request AM/PM format when the locale selected
by LC_TIME lacks the concept. We ignore the format setting in that
case elsewhere and assume 24-hour format, let's do the same for
chat timestamps for consistency.
Florian Müllner [Fri, 23 May 2014 16:38:23 +0000 (18:38 +0200)]
windowMenu: Only add workspace actions when enabled by session mode
When workspaces are disabled by the session mode, all workspace
related actions don't make sense. Worse, the "Move to Workspace ..."
actions allow sending windows into a nirvana with no means to
get them back.
Florian Müllner [Fri, 23 May 2014 15:14:20 +0000 (17:14 +0200)]
viewSelector: Don't re-navigate into the active page
Starting keynav into the active page is handled from a key-press
handler on the stage, however we should not "start" keynav when
we are already navigating elsewhere - the latter can happen when
keynav fails (for instance because the focus is trapped inside an
open app folder or at the end of the dash), and the event bubbles
up to the stage. So make sure to only handle the event to actually
start keynav, to not interfere with the normal navigation handling.
Thanks to Carlos Soriano <carlos.soriano89@gmail.com> for the
debugging footwork.
Florian Müllner [Sun, 25 May 2014 14:46:09 +0000 (16:46 +0200)]
theme: Bring fallback app-menu style closer to GTK+
The fallback app-menu in GTK+'s client side decorations obviously
uses the GTK+ theme rather than the shell one; update the style
of our own fallback app-menu to resemble that style.
Florian Müllner [Sat, 24 May 2014 01:32:44 +0000 (03:32 +0200)]
Support (fallback) app menu in SSD
We now allow "appmenu" in the button layout to make synchronizing it
with GTK+'s client-side decorations easier, but as some people tweak
their settings to get in-window app menus even when using the shell,
actually pop up the app menu when the button is activated.
Florian Müllner [Sun, 25 May 2014 14:38:05 +0000 (16:38 +0200)]
popupMenu: Hide separator label when not in use
The optional label support introduced in commit af063dc2f2ec broke
the centering of separators, as the label still adds additional
spacing even when empty.
Properly hide the label actor in that case to fix the alignment.
Florian Müllner [Mon, 26 May 2014 23:36:41 +0000 (01:36 +0200)]
extensionPrefs: Skip main window when launched with a UUID
The extension-prefs tool is used by gnome-tweak-tool and the
extensions web site to display preferences. However as those
already implement their own extension lists, the main window
is not useful in that context (to not say it is rather silly).
Just skip the main window and only show the specified extension's
preference dialog in those cases.
Florian Müllner [Mon, 26 May 2014 21:40:26 +0000 (23:40 +0200)]
extensionPrefs: Add switches to enable/disable extensions
Bring the extension-prefs tool in line with the mockup by adding
switches to enable/disable extensions, similar to the extension
page in gnome-tweak-tool.
Florian Müllner [Fri, 23 May 2014 02:49:37 +0000 (04:49 +0200)]
extension-prefs: Give the UI a bit of GNOME 3 treatment
The extension-prefs UI has never been great, but as the GNOME 3
design patterns are evolving, it is starting to look seriously
outdated. Modernize the UI a bit to have it fit in a bit better.
Owen W. Taylor [Mon, 19 May 2014 22:15:39 +0000 (18:15 -0400)]
Renable compiler warnings and fix a few that show up
The switch to GNOME_COMPILE_WARNINGS() caused -Wall and other
warnings to not actually be used since GNOME_COMPILE_WARNINGS()
just sets WARN_CFLAGS. Add WARN_CFLAGS to AM_CFLAGS so that
it takes effect.
Add -Wno-error=deprecated-declarations so that when -Werror is
enabled, we don't fail on all the deprecated cogl and clutter
symbols.
Florian Müllner [Sat, 3 May 2014 19:12:29 +0000 (21:12 +0200)]
osdWindow: Check monitor validity before updating
When a monitor is removed, the OsdWindow for that monitor may process
the monitors-changed signal before OsdWindowManager does (which will
remove the OSD). If that happens, we will currently try to access
an invalid monitor; check for this to avoid a couple of warning.
system: Keep key focus when switching between alternatives
When switching between alternatives in AltSwitcher, the currently
visible child is replaced with the alternative. If the original
child has the key focus when it is removed from the stage, the
focus is lost. Detect this case and manually move the focus to
the new child.
workspaceThumbnails: Move to primary monitor first when creating workspace
When dragging a window preview from a non-primary monitor onto a
workspace thumbnail, the window is moved to the primery monitor
first before changing its workspace. However when dragging the window
between thumbnails to create a new workspace, it is kept on its current
monitor instead. This is not only inconsistent, but outright confusing
with the default 'workspaces-only-on-primary' setting, as the newly
created workspace is immediately removed again.
Florian Müllner [Sat, 3 May 2014 18:57:49 +0000 (20:57 +0200)]
main: Don't depend on GSystem unconditionally
We only need GSystem when running under systemd. As libgsystem itself
has a hard dependency on systemd, only import it when actually needed
to keep working on systems where systemd is not available.
Florian Müllner [Sat, 22 Oct 2011 14:48:01 +0000 (16:48 +0200)]
overviewControls: Adjust heuristic for hiding workspace switcher
The workspace switcher should be expanded when workspaces are in use.
Our current implementation assumes that workspaces are used when there
are windows on at least two workspaces. However workspaces are already
used when moving from a non-empty workspace to an empty one (presumably
with the intention to launch something on that workspace), so tweak the
heuristic accordingly.
Carlos Soriano [Wed, 19 Mar 2014 14:23:05 +0000 (19:23 +0500)]
dateMenu: Don't make dateMenuButton reactive on current day
Having the ability to go to the current date if the user is already
on the current date can be confusing. So don't make the button reactive
until the selected date changes.
Carlos Soriano [Wed, 16 Apr 2014 13:32:37 +0000 (15:32 +0200)]
St: remove hover state if reactive disabled
The hover state of a widget can become persistent if
the widget becomes reactive while a pointer grab.
To avoid that, remove hover state if the reactive property
is disabled.
Currently, our logic for page panning isn't great. If the user starts a
pan upwards and hesitates over a new page, we'll go to the *next* page
on release, since the difference is greater, but the velocity wound down
to 0.
Instead of trying to treat it like page down or scrolls, simply do the
math to find the page where the user scrolled to.
This is unfortunately broken for fast swipes, since the user doesn't get
far enough into the new page to make a difference. I'm getting the
impression we'll need a gesture recognizer for this, though, however
crude. Simple hacks I tried, like a velocity multiplier, didn't work
properly.
(or + 1). During panning, these are based on the velocity values
of the gesture action. If we're already on the first or last page
and the panning ends, it's possible to get goToPage that's either
-1 or greater than the last page.
During normal usage, this isn't a problem, since the Y values will
be correct, always. But when panning, the Y values stick to the
finger, and thus if we return early, we won't snap to the exact page,
making it seem like things get "stuck".
Fix this the simple way by clamping to the correctly-ranged values
of pageNumber
calendar: Don't mark translations from GTK+ for translation
The order in which month and year are displayed is controlled by
a "special" translated string in GTK+. We pick up the translation
from there, so make sure that it doesn't get translated again
in gnome-shell.
workspaceThumbnails: Fix removal of multiple workspaces
When workspaces have been removed, we need to remove the corresponding
thumbnails as well; the number of thumbnails that need removing is
the difference between the old number of workspaces and the new one.
Currently we assume that the old number of workspaces corresponds to
the number of existing thumbnails, but that may actually be wrong:
A thumbnail will still be animated out after its workspace has been
removed. As a result, we end up removing too many thumbnails when a
workspace is removed while a thumbnail of a previously removed workspace
is still animating out. Fix this by basing the old number of workspaces
only on thumbnails that have not been removed previously.
Taking an area screenshot doesn't work currently when in "grab mode",
for instance when the message tray or top bar menus are open. Fix
this by using GrabHelper for selecting the area, so grabs are properly
stacked for us.
The code path is completely unmaintained and untested (and probably
unused as well, considering that nobody has complained about accessing
the session object's Active property which does not exist in the
ConsoleKit case).
Most of our ConsoleKit code is already a dummy anyway, just do the
same for the remaining functionality.
projects / gnome-shell.git / log